Product Description:
New 433mhz Universal Key Smart Electric Garage Door Replacement Cloner Car Control RemoteInstructions:
* Working voltage : DC 12V
* Input/Output vlotage : 1~250V
* RF frequency : 433MHz
* Quiescent Current : <5MA
* Max current : 10A
* Max load: 2200W
* Pin : NO / COM / NC
* Remote Control Size : 68*36mm
* Receiving range : Open space is more than 50 meters
* Working temperature : -30~+80 Celsius
* Receiving Sensitivity : >97dbm
* Amount of storage remote controls : 20 pieces
* Support encoding : 1527 Leaning code /2262 fixed code
* RF Operating mode : ASK superheterodyne wireless reception
* Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode
Note:
We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip.
When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an
encryption chip. Therefore, we do not recommend copying the rolling code remote control.
• Input Voltage: 12 V, RF working mode: Superheterodyne
• Receiver sensitivity: > 97 dbm
• Transmitting distance:> 100 m ( open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Support remote type: EV1527 learning code
• Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
• Output terminal: NO , NC , COM
• Dimension of PCB:35 x 30 x 18 mm (L,W,H)
• Remote control battery: 2 x 3 V CR2016 button batteries
Note: Maximum input power is 250 V
Remote programming
-Clearing the code :
Push the learning button on the receiver 8 times , the codes will be reset.
After clearing the code, remotes will be need to be recalibrated
-Momentary mode
Please contact us for detailed use instructions
-Learning the code : ( Toggle - Press remote button to turn on, press again to turn off.)
Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off , it comes into learning state .
-Push the learning key on the receiver 3 times , the LED (on the Receiver)will blink 3 times.
When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3
times .
Push the remote button B, Led flash for 3 times .
After 3 seconds , the LED indicator will be off , Learning to succeed.
Model Number: Wireless Remote Control Switch
Wireless Communication:RF
Frequency:433 MHz
FAQ
1. what is your MOQ ? Usually our MOQ is 500 pcs. But we accept lower quantity for your trial order.
2. Can we provide sample ? Sure. We usually provide existing sample for free. But a lttle sample charge for custom designs. Sample charge is refundable when order is up to certain quantity.
3.How long is the sample LEAD TIME? For existing samples, it takes 1-2 days. They are free. If you want your own designs, it takes 3-7 days, subject to your designs whether they need new printing screen, etc.
4. How long is the production lead time? It takes 10-15 days for MOQ.
5. How much is the freight charge? To save cost for you and in order that you can get goods earlier, we suggest to deliver by express for small quantity.For large quantity, we suggest to deliver by sea.
6. What format of the file do you need if I want my own design? We have our own professional designers. So you can provide JPG, Al, CDR or PDF, etc. We will draw artwork for mold or printing screen for you.
